Nanmac logo, A world leader in thermocouple and RTD solutions since 1956, US Vet Owned, MADE IN USA ISO 9001:2008 Certified, ISO 17025 Accredited, AS 9100C Compliant, DUNS Numbers Enter Nanmac China MTI logo 2011 Nanmac One Liner, Your Source for Complete Thermal Sensing Solutions
Contact a Nanmac Engineer
Call Us Email Us

Heavy Duty High Temperature Thermocouple Probes

#24 Gage (0.020") Size Elements with Standard Connector Attached

A12 Series

Click for Specs

(click icon for specifications)

The standard Nanmac High Temperature Probe consists of an ungrounded thermal junction within a closed end sheath. It also includes a set of standard matching plug and jack connectors. The male connector attached and the female connector (not shown) are furnished with a cable clamp. Maximum service temperature of the connector is 450 degrees Fahrenheit.

The standard High Temperature Probe is available with a four inch support tube attached to the connector end. The purpose of the support tube is to eliminate any damage to the refractory sheath which may be caused by the mounting bushing. The support tube is an 1/8 inch larger in diameter than that of the thermocouple sheath. If a support tube is desired, add the suffix (ST) to the part number.

Jack Panels Thermocouple Extension Wire G9 Series Compression Fittings Selection Guide Standard Connectors Thermocouple Simulator / Calibrator

© 2016 Nanmac Corporation | PO Box 6640 | 1657 Washington St., Bldg. 3 | Holliston, MA 01746 | 1-800-786-4669